Frontier lid temp gauge
2 posters
Page 1 of 1
Frontier lid temp gauge
Is it possible to calibrate the lid temp gauge?
On a brand new frontier I have a couple of proQ probe thermometers both reading 245 in the top vent but the lid thermometer reads 210.
The lid thermometer also has a small amount of condensation in it! Could this be the problem?
Cheers in advance to any help.
James
On a brand new frontier I have a couple of proQ probe thermometers both reading 245 in the top vent but the lid thermometer reads 210.
The lid thermometer also has a small amount of condensation in it! Could this be the problem?
Cheers in advance to any help.
James
Duffy71- Sausage Burner
- Number of posts : 11
Age : 53
Location : James
Registration date : 2013-06-21
Hi James
To calibrate the lid temp gauge you would need to undo to nut at the back of the temp gauge and remove the temp gauge from the lid. Once you have done that you can then turn the other nut at the back of the gauge and it will move the arrow in the temp gauge
be careful if you do this. The condensation should not effect the reading.
Please bare in mind that even though you have put probe thermometer in the top vent it is in a different position and will read differently from the temp gauge on the lid
happy smoking
from Paul
be careful if you do this. The condensation should not effect the reading.
Please bare in mind that even though you have put probe thermometer in the top vent it is in a different position and will read differently from the temp gauge on the lid
happy smoking
from Paul
Re: Frontier lid temp gauge
Cheers. Will do. I assume that once I've got it out but it in boiling water to check that it's 100c / 212F !
Duffy71- Sausage Burner
- Number of posts : 11
Age : 53
Location : James
Registration date : 2013-06-21
Re: Frontier lid temp gauge
Yes that should be fine and then just put it all back when you have finished
happy smoking
from Paul
happy smoking
from Paul
Re: Frontier lid temp gauge
Cheers,you guys are stars.
Duffy71- Sausage Burner
- Number of posts : 11
Age : 53
Location : James
Registration date : 2013-06-21
Similar topics
» Frontier Temp Gauge
» Temp gauge for lower rack in frontier
» 1st cook on my Excel 20 - temp gauge seems way out
» New to the Excel 20 - Temp only around 200F
» Temp range for cold smoking
» Temp gauge for lower rack in frontier
» 1st cook on my Excel 20 - temp gauge seems way out
» New to the Excel 20 - Temp only around 200F
» Temp range for cold smoking
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|