Help with early start on Excel
2 posters
Page 1 of 1
Help with early start on Excel
If I was to start cooking a pork shoulder around 4-5 would it then be ok to back to sleep for around 3-4 hours.
Will the temperature stay at around 200-250f
Also can you confirm that the water bowl should not run dry in 3-4 hours
Thanks Adrian
Will the temperature stay at around 200-250f
Also can you confirm that the water bowl should not run dry in 3-4 hours
Thanks Adrian
adie1975- Sausage Burner
- Number of posts : 16
Location : adrian selway
Registration date : 2014-07-04
Re sleep
Hi Adrian
Yes it should be fine to go back to sleep for 3 to 4 hours as long as have enough charcoal in the basket
restaurant grade would be best. And as long as the water pan is full everything should be ok.
You can always close the bottom 3 vents a little to reduce air flow which will help
with the charcoal burning at a slower rate but don't close them completely But leave the top vent open.
Happy smoking
Kind regards
Paul
Yes it should be fine to go back to sleep for 3 to 4 hours as long as have enough charcoal in the basket
restaurant grade would be best. And as long as the water pan is full everything should be ok.
You can always close the bottom 3 vents a little to reduce air flow which will help
with the charcoal burning at a slower rate but don't close them completely But leave the top vent open.
Happy smoking
Kind regards
Paul
Re: Help with early start on Excel
Thanks Paul, just need to get my timing right.
adie1975- Sausage Burner
- Number of posts : 16
Location : adrian selway
Registration date : 2014-07-04
Re: Help with early start on Excel
Hi Adrian
I will look forward to hearing all about your cook
and seeing some photo would be good to.
Happy smoking
From Paul
I will look forward to hearing all about your cook
and seeing some photo would be good to.
Happy smoking
From Paul
Similar topics
» Need Excel 20 help
» Which Smoker?
» Considering Buying the Excel 20...
» My Excel 20
» Excel 20 in the uk
» Which Smoker?
» Considering Buying the Excel 20...
» My Excel 20
» Excel 20 in the uk
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|