WSM (Weber Smokey Moutain) Stacker
Page 2 of 2 • Share •
Page 2 of 2 •
1, 2
Re: WSM (Weber Smokey Moutain) Stacker
All Weather Griller wrote:
Have you designed a gadget that changes the way the lid fits to the WSM and stops it from becoming a Water Butt?
Nope, not designed a gadget, but if you think upside down like I do, it'll solve the problem
_________________
ProQ... Stacked and Smokin Hot!

Mack- Smokin Hot

- Number of posts: 728
Age: 46
Location: Body in Cornwall, Heart in Africa
Registration date: 2007-11-07

Re: WSM (Weber Smokey Moutain) Stacker
I have one and it's permanently on when not smoking, but it still ingresses water.

All Weather Griller- King of Q

- Number of posts: 286
Age: 35
Location: Worksop, Nottinghamshire
Registration date: 2008-03-19

Re: WSM (Weber Smokey Moutain) Stacker
I say no to the door. Most of the time I wish my WSMs didn't have a door at all.
_________________
Master of "Reverse Sear"

Finney- Sausage Burner

- Number of posts: 11
Age: 49
Location: NC, USA
Registration date: 2008-01-31
Re: WSM (Weber Smokey Moutain) Stacker
All Weather Griller wrote:i know I'm late to the posting of this and bearing in mind my comments it won't really matter.
But.... Have you designed a gadget that changes the way the lid fits to the WSM and stops it from becoming a Water Butt?
A market on its own there, I am sick of emtying water out of mine when I use it.
Drill a small hole in the center of the bottom pan.
The lid is made that way so that the liquids that condensate in the lid don't run out of the cooker and down the outside.
_________________
Master of "Reverse Sear"

Finney- Sausage Burner

- Number of posts: 11
Age: 49
Location: NC, USA
Registration date: 2008-01-31
Re: WSM (Weber Smokey Moutain) Stacker
I am really reluctant to drill the Enamel, if they have designed the lip for this purpose perhaps (and it makes total sense) it should come with the drain hole pre-drilled (prior to the enamel process).

All Weather Griller- King of Q

- Number of posts: 286
Age: 35
Location: Worksop, Nottinghamshire
Registration date: 2008-03-19

Re: WSM (Weber Smokey Moutain) Stacker
All Weather Griller wrote:I am really reluctant to drill the Enamel, if they have designed the lip for this purpose perhaps (and it makes total sense) it should come with the drain hole pre-drilled (prior to the enamel process).
The only problem with this (from a manufacturer's point of view) is that ash will then fall out of the hole in the bottom and may pose a fire hazard.
_________________
ProQ... Stacked and Smokin Hot!

Mack- Smokin Hot

- Number of posts: 728
Age: 46
Location: Body in Cornwall, Heart in Africa
Registration date: 2007-11-07

Re: WSM (Weber Smokey Moutain) Stacker
What about a closeable vent that would allow is to be left open when not in use and closed when in use?

All Weather Griller- King of Q

- Number of posts: 286
Age: 35
Location: Worksop, Nottinghamshire
Registration date: 2008-03-19

Re: WSM (Weber Smokey Moutain) Stacker
That's a possibility, but can still cause a problem if it's left open by mistake.
_________________
ProQ... Stacked and Smokin Hot!

Mack- Smokin Hot

- Number of posts: 728
Age: 46
Location: Body in Cornwall, Heart in Africa
Registration date: 2007-11-07

Page 2 of 2 •
1, 2
Permissions of this forum:
You cannot reply to topics in this forum